Automatic Rebar bending machine used GW42 3.0KW
Automatic Rebar bending machine GW42 is used for bending steel bar on construction project.This machine is high efficiency,big capacity,angle adjusting easy and bending regular.It can bend bar ¢3-42mm into any shapes needed by construction.
1. MOTOR TYPE: Automatic BRAKE MOTOR as Opotional ,Adjustable saddle and pin style working disc featured with easy adjustment and accurate bedning angle .The round working disc can turn back to original position automatically .
2. GEAR BOX & INSIDE GEAR: CAST STEEL GEAR SHAFT: C45 STEEL ,all spare parts can operate safely under heavy load for a long time .
3.STOP GAUGE: C45 STEEL PILE HEAD: CR 40 STEEL WORKING DISK :C45 STEEL EXTERNAL CASE: Q235 for a long working life.
4. Simplicity of operating: one person operation.
5. Pre-setting angle scope form 0-360 degree by adjusting the pin on work plate.
Main Technical information:
Automatic Rebar bending machine | ||||
Model | GW42-1 | GW42D | GW55D | |
Net Weight | 266kgs | 365kgs | 595kgs | |
Packing size | 1020*825*950 mm | 920*950*950 mm | 1280*1130*1290 mm | |
Maximum bend diameter | Q235 steel | 40mm | 42mm | 55mm |
C45 steel | 32mm | 36mm | 45mm | |
Rotation speed of working disc | 5-15r/min | 7-12r/min | 7-8r/min | |
Power of motor | 3kw4hp (Common motor) | 3kw-4hp (Break motor) | 4kw-5.5hp (Break motor) | |
Voltage | 380 V | 380 V | 380 V | |
Bend control way | Automatic | Automatic | Automatic | |
Structure of reduction gearbox | gear type (steel) | gear type (steel) | gear type (steel) |
Accessories: